AMERICAN CONCORDE THAT NEVER WAS
The Boeing 2707 was the United States’ entry into the great supersonic transport (SST) race of the 1960s. Launched by President Kennedy on 5 June 1963 as the National Supersonic Transport program — a direct answer to the Anglo-French Concorde and the Soviet Tupolev Tu-144 — it was designed to be larger, faster and more ambitious than either. Boeing won the FAA competition on 1 January 1967 with a 300-seat Mach 2.7 design, beating Lockheed’s simpler L-2000. Three variants followed: the swing-wing 2707-100; the 2707-200, which added a pair of canards behind the nose to address stability and control concerns as the design matured; and the fixed-wing tailed-delta 2707-300, which replaced them both when the swing-wing had to be scrapped. The -200 embodied the program’s technical crisis: at 306 ft long and 675,000 lb at maximum ramp weight, it would have been one of the largest airliners ever built, but its titanium swing-wing pivot alone weighed 4,600 lb, and no refinement could reconcile that mass with the transatlantic range airlines demanded. In October 1968 Boeing abandoned the variable-geometry wing altogether. Two prototypes and a full-scale mock-up of the -300 were under construction when Congress cut off funding, first in the Senate in March 1971 and then in the House on 20 May by 215 votes to 204. At cancellation Boeing held 115 unfilled orders from 25 airlines — more than Concorde had at the same moment — yet no prototype ever flew. Over 60,000 Boeing jobs were lost, and the SST became known as “the airplane that almost ate Seattle.
This MOC is a 1:80 scale model of the Boeing 2707-200 in TWA livery, designed with a mix of classic bricks, plates and tiles, alongside a large number of Technic parts and gears. The shape of the model is faithful to Boeing’s original 2707-200 design — in fact, I obtained a copy of the original blueprints, scanned them, and used them as reference throughout the design process. Beyond its accurate looks, the model reproduces all the moving features of the real aircraft: retractable landing gear, droopable nose and swing wings.
The MOC comes in two versions: a motorized RC one and a manual one.
The motorized RC version uses two Electric Motor WeDo 2.0 Medium units, powered and managed by a Powered Up 9V Bluetooth Battery Hub and controlled through LEGO’s Powered Up app. Setting up the app takes no more than two minutes and is well explained step by step in the video below.
In the manual version, the wings, nose and landing gear are actuated by turning a hand crank connected to an internal gear mechanism. Turning the crank (or tapping the control in the app, on the RC version) triggers the magic: the nose droops, the wings swing outward and the landing gear extends, transforming the aircraft into its landing configuration. Turning it the opposite way — or hitting the corresponding app command — sweeps the wings back, raises the nose and retracts the gear, returning the aircraft to its supersonic-cruise configuration.
Other MOC features:
– Canard foreplanes
– Wing flaps
– Tailplane elevators
– Rudder
The MOC includes a display stand, on which the aircraft must always rest to ensure the moving parts operate correctly. Sticker sheets and application guide are also included.


















MOC specifications:
Scale: 1:80
Parts count: 4034
Length: 44,9 in – 114 cm – 142,4 studs
Width closed wings: 15,7 in – 39,9 cm – 49,8 studs
Width extended wings: 25,3 in – 64,2 cm – 80,2 studs
Height (including display stand): 10,1 in -25,8 cm – 32,2 studs
Approximate weight: 2307 g / 81,38 oz
Year: 2026
Designed by Bruno Sericano






